2025 Ditch Witch® Fluid Management MR90
- Year 2025
- Make Ditch Witch®
- Model Fluid Management
- Engine D1105
2025 Ditch Witch® Fluid Management MR90
RECYCLE THE MUD. REAP THE PROFITS.The most advanced, most productive mud recycler on the market. The MR90 is a self-contained unit that can mix and recycle drilling mud as well as handle spoils, for exceptionally cost-effective production.
Features may include:
GENERAL- The MR90 has the fastest setup on the market with the use of hydraulic leveling for the screens and hydraulic jack on tongue of trailer, dramatically increasing efficiency and productivity. The only mud-recycling unit that can be transported full of fluid, for increased efficiency and reduced jobsite expense.
- 25-hp (18.7-kW) Kubota® Tier 4 engine provides the power for recycling, supply to the drill and all hydraulic functions, including the shaker action. Rear onboard hopper catches all screened spoils; integral mixer allows drying additives to be mixed into the spoils and discharged through rear hydraulic door.
- Hydraulic pit pump provides more than enough mud for recycling; automatic pit pump control prevents overflow. Variable control of hydraulics helps fine-tune slurry delivery. Onboard high-pressure wash pump for cleaning equipment.
- Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.
Engine
Engine Manufacturer
Kubota®
Engine
D1105
Rated Engine Speed
3,000 rpm
Emissions
Compliance: EPA Tier 4
Cooling
Medium: Water
Aspiration
Natural
Cylinder Liners
3
Stroke
3.09 in (78.4 mm)
Displacement
68.5 in3 (1.12 L)
Engine Power
Manufacturer’s gross power (SAE J1995): 24.8 hp (18.5 kW)
Bore
3.07 in (78 mm)
Fuel System
Fuel Type
Diesel
Fuel Injection
Indirect
Drivetrain
Drive System
Gear pump
Operational
Operating Speed
Shaker: 0-2,000 vpm
Performance
Noise Level
Sound power: 101 dBA | Sound pressure: 88 dBA
Hydraulics
Hydraulic Flow
Recycle flow rate, max: 90 gpm (341 l/min) | Supply to drill, max: 225 gpm (852 l/min) | 3 gpm (15.1 l/min) | rate: 8 gpm (30.2 l/min)
Maximum Pressure
2,500 psi (207 bar) | 2,500 psi (172 bar)
Dimensions
Length
T14R trailer: 216 in (5.48 m)
Height
109 in (2.77 m)
Width
100 in (2.54 m)
Dimensions
Screen angle: 8° | Screen level angle: ±5° | Screen area (coarse): 1,218 in2 (.786 m2) / fine: 1,218 in2 (.786 m2) | Coarse screen micron standard: 165/225 microns | Fine screen micron standard: 70/88 microns | Hose reel capacity (locking): 50 ft (15.3 m)
Capacities
Oil capacity
Engine oil w/filter: 4.2 qt (4 L)
Fuel Capacity
9.2 gal (34.8 L)
Features
Tank total: 445 gal (1685 L) | Tank dirty side: 340 gal (1287 L) | Tank clean side: 110 gal (416 L) | Water tank: 300 gal (1135 L)
Hydraulic Capacity
Reservoir: 8 gal 30.2 L
Weights
Weight
Dry: 6,385 lb (2987 kg) | System weight, w/fluid: 13,063 lb (5926 kg)
Features
Features
Antifreeze: 50/50 water/antifreeze mix